Specifications:

Features:

Based on an innovative tube-in-tube design, this product unit consists of three seamless tubes
placed on top of each other. There are spirals between the tubes to ensure that the space is
maintained between the tubes and turbulence is generated to achieve better heat transfer. There are
no gaps or dead ends in the product channels and electrolytic polishing can be completely drained
without gaskets to reduce any The risk of contamination can be a complete emptying design.
However, bend the three pipes 180˚ to the U-shaped elbow, and bend the three pipes with spirals
step by step, so that there is no risk of leakage (no welds at the corners). The product enters the
middle pipe, the cooling heating medium enters the inside and the outside, and provides the most
effective heat transfer countercurrently. It may also have a cross temperature program. The elbow
absorbs any thermal expansion, so the device is very resistant to heat fatigue. Caused by large
temperature difference during work or steam sterilization. The heat exchanger can be sold as bare
metal or as a complete point-of-use cooler. This module is preferred because it is easy to install and
use directly. The module consists of pipe mounting, coating, valve device and pitot tube device.